The No Toner alert appears if the toner cartridge or toner cartridge and drum unit assembly is not correctly inserted. Remove the printer's toner cartridge and drum unit assembly. After removing the toner cartridge from the drum unit, replace it in the drum unitIn the printer, replace the toner cartridge and drum unit assembly.
If your Epson printer's drum unit assembly or toner cartridge were placed incorrectly, the "no toner" warning would appear.
If your Epson printer does not detect toner, you must dismantle and replace the drum unit assembly and toner cartridge.
Why does Epson printer say it has no toner when it is replaced?
The following are the causes of Epson Printer saying no toner after replacement:
1. Epson printers and toners are incompatible.
2. Your printer is not detecting the presence of a toner cartridge.
3. The printer is not detecting the toner cartridge.
4. The printer's spotlights are not working.
5. The toner cartridge's ink levels are low.
How to Fix if Epson Printer Doesn't Recognize New Toner?
To make the Epson Printer print, the toner cartridge must be recognized by the printer.
As a result, take the procedures outlined below to remedy this issue:
1. Check that you're using the correct toner cartridge for your printer.
2. Wait around 10 minutes after removing the old cartridge before installing the new cartridge.
3. If there are still problems with the new cartridge, remove it and store it safely.
4. Unplug the Epson Printer's power supply and leave it off for 10 minutes.
5. Reconnect the printer to the power source after 10 minutes and reinsert the cartridge.
6. Please turn on the printer to see whether it recognizes the document.
7. If the problem persists, ensure sure the contact area between the toner cartridge and the printer is clean.
8. Make sure you've removed all of the tapes and plastic strips from the toner cartridge since they might cause an interruption.
9. Also, update the firmware for the Epson printer since outdated software can cause a variety of problems.
As a result, you may address the Epson printer's toner cartridge identification problem in this manner. So, you may now take the necessary prints without having to worry about the cartridges.
How to Fix Epson Printer No Toner Error After Replacing?
To correct this problem, follow the instructions below:-
Step 1: Remove the drum unit from your printer by opening the front cover.
Because toner can spill at any moment during the repair, place the drum unit on a disposable cloth or paper.
Step 2: Press the green locking tab on the left side of the drum unit.
Then raise the toner and remove it.
Step 3: Two metals resemble staples on the right side of the drum unit.
Use a clean, soft, and dry towel to clean the metals thoroughly but gently.
Step 4: Replace the toner in the drum unit assembly.
Make sure it clicks into position; the green locking tab will appear when it does.
Step 5: Replace the drum unit assembly in the printer and shut the front cover.
If your Epson's printer still does not detect toner, the toner cartridge is most likely damaged and should be changed.
Why Epson Printer Says No Toner after Replacing Toner?
If your Epson's printer still reads "No Toner" after replacing the toner cartridge, try the following methods:-
1. Determine which color of cartridge needs replacement.
The "No Toner" error message might be for a different cartridge color than the one you changed.
So, check the printer's screen to see which toner color should be replaced.
Replace the needed color if it is not the one you just replaced.
2. Determine which consumable you replaced.
The drum unit and the toner cartridge are two distinct consumables used by your Epson's printer.
If you change the drum unit rather than the toner cartridge, the "No Toner" notice will continue to appear. So, if you committed this error, check and replace the toner cartridge.
3. Remove and reinstall the toner
One probable cause of your Epson's printer not recognizing the toner cartridge is incorrect toner installation.
To remove the toner, follow steps 1-3 in the "How to Replace Epson Printer Toner Cartridge" section of this page.
After that, repeat steps 5-6 of the same solution to reinstall the toner.
4. Make use of an original Epson printer toner cartridge.
If your Epson's printer is refusing to take fresh toner, it is most likely because the toner is not a genuine Epson printer toner cartridge.
When you use an off-brand toner cartridge in your Epson's printer, you endanger the machine's life.
If you cause damage to your printer by using an off-brand toner cartridge, you forfeit your access to your Epson's limited warranty.
5. Ensure that the Corona Wire is clean.
Cleaning the corona wires is critical when replacing the toner in your Epson's printer.
When changing the cartridge, take the drum unit apart, reassemble it, and clean the corona wire if you did not do this.
6. Confirm that the toner cartridge is brand new.
If you remove a toner cartridge from another printer or use an already used toner cartridge, the toner status of your Epson's printer will not be reset.
To avoid the toner problem, make sure the toner cartridge is fresh.
If your Epson's printer still shows a toner error after doing all of the above, the issue may be a bug.
In this instance, you have the option of overriding the message.
FAQ
1. How can I get my Epson printer to print when the toner is low?
On many Epson printers that display a "low toner" warning, just remove the cartridge, wait a bit, and replace it. It clears the printer's memory and instructs it to "look again" at toner levels. This might help you get the most out of your Epson toner cartridges
2. Why is my Epson printer reporting that there is no toner while there is?
The No Toner warning occurs if the toner cartridge or toner cartridge and drum unit assembly is not properly placed. Remove the toner cartridge and drum unit assembly from the printer.
Reinstall the toner cartridge in the drum unit after removing it from the drum unit.
3. Can I print without using toner?
Modifying your printer settings may allow you to print when one of your printer cartridges is empty, however this is depending on your printer's tolerance.
It can be quite frustrating when your printer refuses to print black text because one of your color cartridges is empty.
4. What does it mean when my printer suggests to replace the toner?
The notice "Replace Toner" indicates that the toner cartridge has reached the end of its useful life. Therefore, the toner cartridge should be replaced as soon as possible.
For solving more issues related to epson printer click on this link :- https://printersetup.org/epson-support/